Module contains 8 Triacs with zero-cross detector for programming the intensity of incandescent lamps, heating elements, AC LED dimmable bulbs or fan speed controlled through a micro-controller.
Working AC voltage 80v to 240v.
Auto detect 50Hz or 60Hz.
Zero-Cross detection (with zero/cross output pin SYNC).
Compatible with any ARDUINO, RASPBERRY boards.
Low voltage side and high voltage side is completely isolated.
Dimensions of the PCB 131mm x 91mm (5.16inch x 3.58inch). Four mounting holes diameter 3.2mm (0.13inch).
Connected LOAD current for each channel 5A long-term.
NOT appropriate to change the brightness of fluorescent lamps !!!
For inductive load controlling must be connected RC snubber
Dimming control via firing angle method.
Warning: This project deals with AC electricity which is dangerous if you don’t know how to treat it safely.
You must treat electricity with caution!
AC LED Bulb video : https://youtu.be/oqRyJLcfOxo
8 Channel Halogen Bulbs Test : https://youtu.be/yeU55jsB7AM
Testing sketches (50Hz) : https://drive.google.com/open?id=0B6GJokXFb5oEdFZoajRDY1doZ1U